×
×

ギャラリーを閉じる

ウェビック安心サービス 無料保証無料保証 対象商品
下取対象下取り 対象商品

今ならポイント2倍 対象商品

【SIP LEGAL】 ブレーキキャリパー SIP ラジアル GRIMECA ディスクブレーキ Classic NT/PX’98/MY 20mm用 アクスルブラケット付 ラジアル 82mm フロント

商品番号:5644BR00    

掲載開始日:2026年05月29日

STAR Deluxe 2S 150、STAR Deluxe 4S 150、STA... ( 適合車種を見る )

  • NEW
  • 在庫有り
  • 送料無料

販売価格:¥49,258(税込)

実質価格:¥48,273(税込) 最大985ポイント(985円相当)獲得※ポイント詳細

Webikeカードなら

さらに+1.5%還元!

新規ご入会で+3,736ポイントプレゼント!

webikecard

今ならWebikeカード入会で3,000ポイント獲得!
さらに、条件達成で最大4,000ポイント、合計最大7,000ポイント還元!

07/06 00時34分現在:在庫あり(パートナー在庫)
今すぐのご注文で、2026年07月12日 日曜日 から 2026年07月19日 日曜日 に出荷予定です。

ご注文前に正確な納期をご確認したい場合は「納期のお問い合わせ」よりお問い合わせください。
数量:

logo_w_pit_in_square_colorWebikeピットイン パーツ直送・取付サービス

取付依頼の流れ

ポイント詳細

Webikeポイント
2
%還元!
webikeポイント獲得: 985ポイント 2%還元・¥985相当(ウェビック)
for Vespa 50-125/PV/ET3/PK/S/SS/XL/XL2/125 VNA -TS/150 VBA-Super/Rally/PX/PE/T5/Cosa
also fits with Axle Seating Radial 82mm for Vespa ET2/ET4/GT/GTS/GTV/LX/LXV/S/PIAGGIO ZIP II/FR/SP 50-150ccm
forged aluminium
black anodized with red caps
4 Piston,radial mounting
Φ 25,4 mm
Hole spacing:82 mm
homologation:with ABE,KBA 100025
Brake SPORT - ambitious riding and Grade AA - first-class repair
Sturdy,torsion-resistant Brake Calliper in mono-block design
Very good braking performance and good modulation due to 4 Pistons
with part type approval according to StVZO (formerly ABE)
Road legal !

Assembly&Instruction Manualsはこちら
Assembly&Instruction Manualsはこちら
ABE,E-passport&parts certificateはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

The radial Brake Calliper from SIP Performance for Vespa PK,PX,Lusso T5,modern Vespas and many other vehicles.
Technical progress does not stop at the Vespa and SIP Performance presents a radial front Disc Brake that raises the braking performance of classic and modern Vespas to a new level.
Extremely stable mono-block design
Four brake pistons and harmonious hydraulic transmission
With part type approval in accordance with StVZO (formerly ABE)
Results from the test laboratory are often good for surprises,but the performance of our 5644 Brake Calliper has exceeded the wildest expectations.
The one-piece “mono-block” construction and the forged material of the Pliers make them so torsion-resistant that they expand ten times less than others under load.
Four pistons,each with a diameter of one inch,distribute the braking force over particularly large pads.
This not only results in strong deceleration,but also very good heat dissipation and gives the brake exceptional stability.
Nevertheless,the hydraulic transmission ratio in conjunction with standard brake pumps and the SIP brake pump of our Basterd (art.
no.
56370000) is appropriate and not too aggressive.
None other than the racing team “Team Germany 111” has chosen this brake to fight for victory in the 24-hour race in Zuerra in 2025!
In accordance with our SIP principle,we will only release the parts for sale as soon as we have received confirmation from the Federal Motor Transport Authority that they are approved for use in road traffic.
The enclosed “parts type approval” (TTG) corresponds to the former German “Allgemeine Betriebserlaubnis” (ABE).
In conjunction with the 39072 Brake Calliper bracket (Axle Seating),the upgrade to the 5644 radial brake calliper is officially permitted for all Classic Vespas with factory-fitted Disc Brakes; this includes late PX models,for example the so-called “PX 98” and “Millennium”.
For all other Vespa models,individual approval is made considerably easier by the TTG.
After all,the expert can see that the components meet the requirements in terms of power,strength,etc.
In this case,it is advisable to use a Brake Disc that also has an ABE or ECE marking; and to use a Wheel Hub for which a parts certificate is available,for example our 39044200.
Otherwise,from a “TUV point of view”,you should use original Piaggio parts if possible,as the expert can assume that these have already been tested and approved within the frame of the vehicle homologation.
Brake Calliper and Bracket are available individually or as a set (564439xx).
The respective approval document is always included.
We also offer a complete front radial Disc Brake with parts certificate (part no.
300R30xx).
The radial brake calliper 5644 can also be mounted with brackets (Axle Seating) from other manufacturers and a hole spacing of 82 mm,for example with AF-Parts TOURER 39061100.
It also fits modern Vespas with a left-hand Suspension Arm (ZIP,ET2,ET4,Primavera 125-150,Sprint),for example in combination with this Axle Seating 39061900.
Conclusion:

ユーザのインプレッションを見る

適合車種: STAR Deluxe 2S 150、STAR Deluxe 4S 150、STAR Deluxe 4S 125、STAR Deluxe 4S 200、150ET4、S125、S150、S50、STAR Deluxe 2S 125、STAR Auto... ( 適合車種を見る )


SIP Scootershop:エスアイピー スクーターショップ

SIP Scootershop:エスアイピー スクーターショップ

SIP Scootershopは、ドイツに拠点を置く世界最大級のスクーターパーツ専門ブランドです。 ベスパをはじめとするクラシックからモダンなスクーターまで、圧倒的な品揃えを誇ります。自社開発の高品質なカスタムパーツやアクセサリーも展開。世界中のライダーから愛される、スクーターライフを支えるトップブランドです。

最近チェックした商品

ページ: 1 / 1
買い物カゴアイコン
買い物カゴを確認する
一緒にチェックされている商品
×