【SIP PERFORMANCE】 クラッチフリクションプレートセット COSA 2 Race クラッチ「COSA 2」用

Φ 108 mm
4 clutch friction plates，th 1 x 2，40mm，3 x 3，00mm
Black Carbon
reinforced
24 frictional segments
TUNING RACE - for professionals and for tuned engines

Technical tipsはこちら
Assembly＆Instruction Manualsはこちら
Assembly＆Instruction Manualsはこちら
Technical tipsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

Clutch Friction Plates from SIP PERFORMANCE on reinforced backing material.
Made by Newfren！ The four SIP PERFORMANCE Race Clutch Friction Plates are available in two versions：made from carbon black or a high-quality cork mixture.
In contrast to standard cork facings，they have 24 separate friction segments，which ensure perfect lubrication，better cooling and ideal power transmission at the same time.
This makes them top-class Clutch Friction Plates.
A common problem with Cosa clutch facings is worn “lugs”.
This is often caused by the backing material being too soft.
The SIP PERFORMANCE Race Clutch Friction Plates are manufactured on a harder backing material.
This significantly increases the service life of the “lugs”.
Note：When assembling，pay close attention to the correct sequence of the separating and friction plates.
They must also not be bent，as this can lead to problems when cutting.
Soak the pads in Gearbox Oil for one night before fitting.
New Locking Washer，Woodruff Key and Nut should also be used.
Check the Pressure Plate and Push Rod for wear and replace if necessary.
A SIP/MMW/S＆S Sport/Race basket is recommended for all Engines over 15 hp.
When replacing the Clutch Friction Plates，the Thrust Washer of the clutchshould also be replaced.

ユーザのインプレッションを見る

適合車種： P150E、STAR Deluxe 2S 150、STAR Deluxe 2S 125、PX150、PX125、PX125E、PX125E Arcobaleno、P150E Arcobaleno、Cosa200、PX200E、PX200E Arcob... ( 適合車種を見る )