【SIP PERFORMANCE】 排気温度センサー SIP EGT SIPタコメーター／スピードメーター用

incl. converter
Grade 1＊ - first-class repair and for tuned engines

FAQs - Frequently asked questionsはこちら
Assembly＆Instruction Manualsはこちら

※取扱説明書が付属する場合は外国語となります。
※輸入商材の為、納期が遅れる場合がございます。あらかじめご了承ください。
※画像には他の商品が含まれている場合があります。
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。

The SIP Exhaust Gas Temperature (EGT) converter determines the temperature of the exhaust gases received from the sensor and sends the converted data to our SIP Speedometer/Rev counter - 2.0 for display.
The ability to read the temperature of the exhaust gases allows a rapid diagnosis of the true condition of any two-stroke motor.
This essential information provides usable proof of its running parameters，in particular the ignition and jetting settings，along with state of compression，etc.
The EGT can also warn immediately of imminent issues and so help prevent expensive damage to the heart of the motor！
The detailed instructions for the mounting of this SIP conversion kit describe how to best position the sensor within the exhaust of a vintage，geared Vespa.
During normal，everyday use the EGT should lie between around 400°C and 700°C.
If this value suddenly spikes to，lets say 1000°C，there is very probably something going horribly wrong.
This can include pinking of the motor，dangerously altered ignition timing due to a sheared woodruff-key，failing gaskets and similar horror stories that lead to holed pistons，seized barrels/crankshafts and so on...
The EGT converter，or adapter box，is integrated into the scooters existing wiring loom between the electronic ignition unit and the SIP Speedometer/Rev-counter 2.0.
The converter is connected to our speedometer using the existing cylinder head temperature sensor socket and the EGT is then displayed in the corresponding area of the speedometer face.
As this display can only display values up to 250°C this converter delivers a value that displays 10％ of the actual EGT.
In practice this translates to an actual EGT of 700°C being displayed as ‘70’.
The cylinder head temperature can no longer be measured while the EGT converter is attached.
The temperature sensor is attached to the exhaust manifold using a very robust clamp and only one small hole needs to be drilled to enable its correct positioning.
Once properly tightened the conical sealing nut included in the delivery effectively seals the gap surrounding the sensor.
SIP - TIP：Alternatively，a weld-able sensor-fixing nut (＃50412500，Steel/ ＃50412600，stainless steel) could be used.

ユーザのインプレッションを見る

適合車種： P150E、S150、S50、Sprint 125、125、PX150、PX125、50SS、50L、50N、50R、PK50、PK50S、PK50SS、P80、P80E、PK80S、90Racer、90、100、100Sport、PK100S、PK... ( 適合車種を見る )